RFSM40R
Active RFID Reader for Tilt Detector
RFSM40R Active RFID Reader for Tilt Detector
( Dimensions, 5.2 cm X 7.2 cm X 2.8 cm)
This receiver can store 14 user defined ID (no need
to use pc to configure. It is configured via on board mini button). The on
board super loud buzzer will will triggered when the received ID matches
one of the stored ID, as a result this can be used to monitor 14 motion
detector RFSM40T at the same time.
RFSM40R RFSM40T User
Guide
How to set up monitor list
- double click the on board mini button will clear
all stored ID (you will hear a long beep sound, 1 second long, to
confirm internal ID list cleared
- To register a motion detector
- turn on the motion detector
- hamper the motion detector
- you can see the green LED will be toggled (to
confirm a valid ID is in range)
- click the on board mini button
- you will hear the 2 short beep (0.3 second) to
confirm the ID registration
- when you hamper the motion detector again, you
will bear the sound from the buzzer
Key Benefits, RFSM40R Active RFID
Reader for Tilt Detector
- simple and straight forward setup
- Can monitor 14 motion detectors at the same time
Specifications, RFSM40R Active RFID
Reader for Tilt Detector
| Power Supply |
9V ~ 12V center positive |
| Power Consumption |
< 100 mA |
| Operating Temperature |
0 - 50C |
| Operating Frequency |
315 MHz or 433 MHz |
| Internal Storage |
12 ID |
Pricing, RFSM40R Active RFID
Reader for Tilt Detector
| Description |
$US |
| RFSM40R |
$39.95 |
|