RF40315T-xc Active RFID 40 Meters Transmitter with Enclosure


RF40315T-xc Active RFID 40 Meters Transmitter with Enclosure ( Dimensions, 11.5 cm X 6.5 cm X 3.5 cm)

An unique 4 characters (A-Z, a-z, 0-9) will be sent out on every 2.5 seconds plus/minus 0.5 second. The matching receiver RF8315R can receive the ID within 40 meters although the RF power is very low. The transmitter will only turn on when ID is transmitting (< 0.01 second), as a result it will not cause data jam to other devices that are using the same frequency band.

Key Benefits,  RF40315T-xc Active RFID 40 Meters transmitter with Enclosure

  • 4 X 2AA Alkaline battery can provide power up to 3.5 year
  • Can send data to 40 meters (line of sight). Can be up to 100 meters if working environment is excellent
  • No setup required
  • Anti-collision algorithm is employed. RF8315R can handle 160 transmitters at the same time.

Specifications,  RF40315T-xc Active RFID 40 Meters transmitter with Enclosure

Power Input 4 X 2AA Battery
Power Consumption 6mA when transmitting, 12uA when idle (6V input). 1.2mA when idle (9V to 40V input)
Operating Temperature 0 - 50C
Operating Frequency 315 MHz
Data Output 4 characters (A-Z, a-z, 0-9). All transmitters carry unique ID
Effective Radius 40 meters (line of sight)
RF output power < 15mW

Pricing,  RF40315T-xc Active RFID 40 Meters transmitter with Enclosure

Description $US
RF40315T-x $59.95

Application,  RF40315T-xc Active RFID 40 Meters transmitter with Enclosure

  • Vehicle tracking
  • Moving object tracking

Application Notes

This transmitter is not suitable for small in house application. The RF is bouncing inside small structure which will generate many fault signal. It is very difficult for the receiver to distinct whether the ID is correct or not.  It is an excellent choice for outdoor application.

It has no problem for object moving no faster than 25 km. There may not be100% reliable if moving faster than 25 km.

The receiver RF8315R cannot receive ID sent by this transmitter within 2 meters.

The length of the antenna is very crucial to the overall design. The length of the antenna cannot be changed. The initial section of the antenna need to be perpendicular to the PCB

Visit our eBay Store

We can provide 433 MHz version on request. Please send your request to EnochChan01@gmail.com

Download ActiveX Control, VB Demo Project, User Guide and FAQ

Download Demo Application

Home