This receiver works with all Ananiah Electronics Active Transmitters. When an Active Transmitters such as RF8315T or RF40315T, the receiver will turn on one of the sever on board Led according to the RF strength. Not only the Led will be turned but also the buzzer will be activated. The stronger the RF strength the faster the beeps. The receiver can store up to 24 ID for authentication.

Specification

Power input: 9V 20mA

Dimension: 7cm X 3cm X 2.5cm

Max. ID : 24

DIP Switch Settings

 How to add add/remove ID for authentication

1.  turn off the receiver

2.  set DIP switch 3 to OFF

3.  turn on the receiver

4.  place the transmitter 1 meter away from the receiver and turn it on;

5.  click the on board tic switch. If the ID is not in the stored ID list and there is room for new ID, the ID will be added and you will hear 2 short beeps. If the ID can be found from the stored ID list, this ID will be removed and you will hear 1 long beep.

What is Authentication

If it is in Authentication mode (DIP switch 2 is ON). The receiver will react to those ID stored, otherwise this will react to any ID.

Pricing,  RF3315R Active RFID Recevier Module

Visit our eBay Store

We can provide 433 MHz version on request. Please send your request to EnochChan01@gmail.com

Home