This is designed to receive RS232 data form any device and send those data to remote server instanly via GSM/GPRS network.

Specification

• this is specially made for MOD9001C modem (this is selling in this store)
• the modem connection will be controlled by this module automatically and you don't need to know any AT commands. Just concentrate on your application development
• this controller expects there are data (1 character is sufficient) receive for every 1 minute. If no character receives, it will keep on reconnect
• 1 way data transmittion, data receives from RS232 device will be sent to the remote server only
• 9V to 24V input with reverse power input protection
• some RS232 device accept power input from pin 7. There is a switch for this purpose
• the voltage to pin 7 can be selectable, either 5V 1A or power input to the module minus 0.8V

How it works

• burn the remote server IP and port number to the module by using included Windows software
• plug the female side RS232 to MOD9001C with a provided cable
• plug the RS232 device into the male RS232 of the module
• plug in power
• the controller will connect the remote server
• data receive form the RS232 device will be sent to the remote server instantly

Application

• you can send RF8315R (our active RFID receiver module) data to central server remotely through GSM network, as a result you can send this data all over the world. This makes the tracking globally.
• GPS tracking unit for fleet management. We build our tracking unit by using
  • MOD9001C (GSM modem to send data to central server)
  • GPS01 (GPS NMEA sentence decoder)
  • GPS receiver (any receiver that export NMEA sentence)
  • this controller board